GE ImageQuant LAS 4000 - 4.6 Exposing fluorescent samples (EtBr)

4 Operation
This chapter describes how to operate the ImageQuant LAS 4000 and how samples are to be placed
in the instrument. The steps required to record an image are also described.
4.1 Operation overview
The general flow of operation is as follows:
Turn on the instrument and computer
Start the Control Software
Place the sample
Expose the sample
Analyze the image
Preparation
Exposure
4.2 Preparation
4.2.1 Starting the ImageQuant LAS 4000 and Control Software
The ImageQuant LAS 4000 and Control Software are started as follows:
42 Getting Started with ImageQuant LAS 4000 28-9607-59 AB
4 Operation