GE ImageQuant LAS 4000 Original Instructions

Changing the light sources
Both trans (transmitted) and epi (incident) light sources are available for exposure with the ImageQuant
LAS 4000.
Peak wavelengthNameType
312 nmUV transilluminator
Transmitted
-White light table
365 nmUV Epi light
Incident
460 nmBlue Epi light
520 nmGreen Epi light
630 nmRed Epi light
710 nmNIR Epi light
-White Epi light
Changing the transmitted light source
1
If no transmitted light source is currently in place inside the instrument, proceed to step 4.
2
Turn the lever holding the transmitted light source to unlock it.
3
Pull out the transmitted light source carefully along the guide while holding it with both hands.
4
Push the new transmitted light source in along the guide at the bottom of the IDX.
44 Getting Started with ImageQuant LAS 4000 28-9607-59 AB
4 Operation
4.2 Preparation
4.2.2 Preparing the ImageQuant LAS 4000 for exposure

GE ImageQuant LAS 4000 Specifications

General

Brand	GE
Model	ImageQuant LAS 4000
Category	Laboratory Equipment
Language	English