GE LOGIQ E9 Service Manual

GE
D
IRECTION 5535208-100, REV. 2 LOGIQ E9 SERVICE MANUAL
Chapter 4 Functional Checks 4 - 31
Section 4-3
Functional checks
4-3-1 Overview
After setting up the system, performing an upgrade, or replacing hardware, perform all appropriate
functional tests before returning a system to the customer.
4-3-2 Preparation
Turn on power to LOGIQ E9. For detailed description, see: 4-2-2 "Power ON/Boot Up" on page 4-3.
4-3-3 Basic Controls
4-3-3-1 Trackball Area
Different functions can be assigned to the trackball depending of the current active mode. The Trackball
area consist of:
• The Trackball: used as a cursor control in acquisition mode, scrolling control in freeze and as a
selection tool (like a mouse cursor) in post-processing mode.
• Three SELECT keys (identical): Perform the selected control or highlighted menu item.
• The TRACKBALL key: Toggles between the available trackball function assignments displayed in
the Status bar.
• The update menu key: enables quick access to image related functions from a pop-up menu.
4-3-3-2 Other Controls
Other controls are located on separate keys (knobs and buttons) or groups of keys on the Operator
Panel.

GE LOGIQ E9 Specifications

General

Type	Ultrasound System
3D/4D Imaging	Yes
Transducer Ports	4 active ports
Connectivity	DICOM, USB, Ethernet
Applications	Abdominal, Vascular, Musculoskeletal, Small Parts, Urology, Pediatric, Cardiac, Obstetrics/Gynecology
Transducers	Linear, Convex, Phased Array, Volume
Doppler Modes	Color Doppler, Power Doppler, Pulsed Wave Doppler, Continuous Wave Doppler
Elastography	Yes
Advanced Features	B-Flow, Volume Navigation
Portability	Cart-based system
Display	19-inch high-resolution LCD monitor