GE LOGIQ E9 Service Manual

GE
D
IRECTION 5535208-100, REV. 2 LOGIQ E9 SERVICE MANUAL
3 - 32 Section 3-7 - Configuration
Section 3-7
Configuration
3-7-1 Purpose of this section
This section describes how to configure the LOGIQ E9.
3-7-2 LOGIQ E9 configuration
For complete instructions, refer to the appropriate version of the LOGIQ E9 Basic User Manual, Chapter
16. See: Table 1-8 "LOGIQ E9 Basic User Manual per console" on page 1-20.
3-7-2-1 System Configuration
- Set Device Destinations (see: 4-2-11-8 "Connectivity — Recording Miscellaneous settings" on
page 4-24).
- Set Dataflow (see: 4-2-11-6 "Connectivity — Recording Dataflow settings" on page 4-22).
- Set Buttons (see: 4-2-11-7 "Connectivity — Recording the Print Key Assignments" on page 4-
23).
- Set up System Admin (see: 4-2-11-9 "Admin — Recording the Software Option Keys" on page
4-26).
- Set up Users (see: 4-2-11-10 "Admin — Users" on page 4-27).
- Set up Backup management (see: 4-2-11-11 "System — Data Store Management" on page 4-
28).
- Set up Peripherals (see: 4-2-11-12 "System — Recording Peripheral settings" on page 4-29).
- Set up Keyboard: language and regional settings. (For complete instructions, refer to the
appropriate version of the LOGIQ E9 Basic User Manual, Chapter 16.)

GE LOGIQ E9 Specifications

General

Type	Ultrasound System
3D/4D Imaging	Yes
Transducer Ports	4 active ports
Connectivity	DICOM, USB, Ethernet
Applications	Abdominal, Vascular, Musculoskeletal, Small Parts, Urology, Pediatric, Cardiac, Obstetrics/Gynecology
Transducers	Linear, Convex, Phased Array, Volume
Doppler Modes	Color Doppler, Power Doppler, Pulsed Wave Doppler, Continuous Wave Doppler
Elastography	Yes
Advanced Features	B-Flow, Volume Navigation
Portability	Cart-based system
Display	19-inch high-resolution LCD monitor