GE LOGIQ E9 Service Manual

GE
D
IRECTION 5535208-100, REV. 2 LOGIQ E9 SERVICE MANUAL
Chapter 3 LOGIQ E9 Setup 3 - 13
Section 3-5
Preparing for setup
3-5-1 Verify Customer Order
Compare items received by the customer to that which is listed on the delivery order. Report any items
that are missing, back ordered, or damaged.
3-5-2 Physical inspection
Verify that the LOGIQ E9 arrived intact (visual inspection).
If the LOGIQ E9 has been damaged, please refer to “Damage in Transportation “on page x in the
beginning of this manual.
3-5-2-1 LOGIQ E9 voltage settings
See: 3-6-3-1 "Verification of the LOGIQ E9’s voltage setting" on page 3-17.
3-5-3 Volume Navigation Stand
To assemble the Volume Navigation Stand, See: 8-15-2 "Assembling or replacing the Roll Stand" on
page 8-617 or 8-15-4 "On-Board V Nav Stand Option Contents, location and placement of parts" on
page 8-625.

GE LOGIQ E9 Specifications

General

Type	Ultrasound System
3D/4D Imaging	Yes
Transducer Ports	4 active ports
Connectivity	DICOM, USB, Ethernet
Applications	Abdominal, Vascular, Musculoskeletal, Small Parts, Urology, Pediatric, Cardiac, Obstetrics/Gynecology
Transducers	Linear, Convex, Phased Array, Volume
Doppler Modes	Color Doppler, Power Doppler, Pulsed Wave Doppler, Continuous Wave Doppler
Elastography	Yes
Advanced Features	B-Flow, Volume Navigation
Portability	Cart-based system
Display	19-inch high-resolution LCD monitor