GE
D
IRECTION 5535208-100, REV. 2 LOGIQ E9 SERVICE MANUAL
1 - 4 Section 1-2 - Service manual overview
1-2-4 Product description
1-2-4-1 Overview of the LOGIQ E9 ultrasound scanner
The LOGIQ E9 ultrasound unit is a high performance digital ultrasound imaging system with total data
management.
The system provides image generation in B-Mode, Color Doppler, Power Doppler, M-Mode,
Color M-Mode, PW and 4D, Tissue Velocity imaging, Volume-Guided Ultrasound and Contrast
applications. The fully digital architecture of the LOGIQ E9 unit allows optimal usage of all scanning
modes and probe types throughout the full spectrum of operating frequencies.
Signal flows from the Probe Connector Panel to the Front End, and then over to the Back End Processor
and finally to the monitor and peripherals.
System configuration is stored on the hard drive in the Back End Processor.
• All necessary software is loaded from the hard drive on power up. to check for installed options.
1-2-4-2 Purpose of the operator manual(s)
The operator manuals should be fully read and understood before operating the LOGIQ E9.
The online versions of the operator manuals are available via the Help function on LOGIQ E9’s operator
panel.
To Next Page
Loading...
