GE
D
IRECTION 5535208-100, REV. 2 LOGIQ E9 SERVICE MANUAL
Chapter 8 Replacement procedures 8 - 207
8-9-3 BEP replacement - R4.x and later
NOTE: BEP replacement requires a software reload.
If the battery does not come installed in the BEP FRU, see 8-9-9 "BEP Battery Pack replacement - R4.x
and later" on page 8-239 to install / transfer the battery into the new BEP.
Table 8-124 Manpower / Time and Tools
Manpower /
Time
Tools
One person /
1 hour if all options
are installed plus the
time it takes to load
the software,
excludes travel time
Refer to: 8-2-5 "Tools needed for servicing the LOGIQ E9" on page 8-5.
To Next Page
Loading...
