GE LOGIQ S8 User Manual

GE HEALTHCARE
DIRECTION 5394227, 12 LOGIQ S8/LOGIQ E8 SERVICE MANUAL
Section 7-3 - Gathering Troubleshooting Data (R1 to R4) 7 - 17
7-3-7 Capturing Network Logs with Network Sniffer (cont’d)
10.) Press Alt+N to restore Sniffer window and observe the network activity.
Figure 7-16 Sniffer Window and Network Activity
A.) “Packet List” pane - the packet list pane displays all the packets in the current capture file. Each line
in the packet list corresponds to one packet in the capture file.
B.) “Packet Details” pane - shows the current packet (selected in the “Packet List” pane) in a more
detailed form. This pane shows the protocols and protocol fields of the packet selected in the
“Packet List” pane.
C.) “Packet Bytes” pane - The packet bytes pane shows the data of the current packet (selected in the
“Packet List” pane) in a hexdump style.

GE LOGIQ S8 Specifications

General

Type	Ultrasound System
Display Type	LCD
3D/4D Imaging	Yes
Connectivity	DICOM, USB, Ethernet
Display Size	19 inches
Transducers	Linear, Convex, Phased Array
Doppler Modes	Color Doppler, Power Doppler, Spectral Doppler
Operating Modes	B-Mode, M-Mode
Applications	Abdominal, Cardiac, Obstetrics, Gynecology, Vascular, Musculoskeletal
Portability	Cart-based
Transducer Ports	4