GE MAC VU360 User Manual

Troubleshooting
Error Message Error Condition How to troubleshoot:
Cannot perform action while
printing
You have tried to perform
below actions while printing a
patient report:
• Start a test for a new
patient
• Delete the patient report
• Change speed, gain, or filter
• Access User Menu
• Access Orders, Files, or
Queue lists
• Power off, lock, log out,
standby or privacy mode
Perform only the allowed
actions.
Table 32: Common Printer Errors
Error Message Error Condition How to troubleshoot:
Low Battery. Printer is
disabled. Connect power cord.
Low battery Connect power cord.
High printer temperature.
Printer disabled. Contact
Service.
High printer temperature Restart the system to check
if the error is resolved. If the
error persists, contact your GE
Healthcare Service Support
representative.
Printer error. Restart system.
Contact Service.
Unknown error or hardware
failure in printer
Restart the system to check
if the error is resolved. If the
error persists, contact your GE
Healthcare Service Support
representative.
Incompatible firmware. Incompatible printer firmware Contact your GE Healthcare
Service Support representative
to upgrade printer firmware.
Acquisition error. Fix and retry
printing.
Printing stopped due to
acquisition error
Rectify the error with the
acquisition module and retry
printing.
Printer error. Retry. If issue
persists, restart system.
Unknown error in printer Retry printing. If the error
persists, restart the system.
Printer is recovering. Please
wait ...
Printer recovery error Wait for the printer to recover.
If the error persists, restart the
system.
2088531-370-2  MAC VU360
™
Resting ECG Analysis System 125

GE MAC VU360 Specifications

General

Device Type	Electrocardiograph
Power	100-240 V AC, 50/60 Hz
Battery Type	Lithium-ion
Connectivity	USB
Data Storage	Internal memory, USB drive
Sampling Rate	1000 samples per second
Battery Life	Up to 4 hours