Chapter 1. Installation
2 PanaFlow™ XMT1000 User’s Manual
1.3 Unpacking the XMT1000
Before removing the XMT1000 from its box, please inspect both the box and the instrument carefully. Each instrument
manufactured by GE is warranted to be free from defects in material and workmanship. Before discarding any of the
packing materials, account for all components and documentation listed on the packing slip. The discarding of an
important item along with the packing materials is all too common. If anything is missing or damaged, contact GE
Customer Care immediately for assistance.
The XMT1000 is supplied with both a serial number label and a certification label for identification of the instrument
(see Figure 1 below and Figure 2 on page 3). The system can be mounted either on an existing meter body (local
mounting) or at another location via a connecting cable (remote mounting).
Figure 1: Typical XMT1000 Labels (Aluminum Enclosure)
Model & Serial Number (Boston) Model & Serial Number (Shannon)
Certification (US/CAN, IECEx/ATEX)
[FISCO]
Certification (US/CAN, IECEx/ATEX)
[Standard]
To Next Page
Loading...
Need help?
General
