Appendix D. Foundation Fieldbus Communication
60 PanaFlow™ XMT1000 User’s Manual
D.2.5 DD File
The DD file can be found on the Foundation Fieldbus website www.fieldbus.org under GE as manufacturer and
XMT1000 as model. It may also be found on the DCS vendor website if available.
D.2.6 Default Node Address
The default node address for each XMT1000 flow meter from the factory is 17 (see Figure 22 below). This should be
changed during commissioning.
Figure 22: XMT1000 Device Properties
To Next Page
Loading...
