GE PanaFlow XMT1000

Chapter 2. Programming
16 PanaFlow™ XMT1000 User’s Manual
2.5 Menu Maps
Use the menu maps in this section to program the desired XMT1000 features.
• "Measurement Display Menu Map (Rev. 10)" on page 17
• "Main Menu Map (Rev. 10)" on page 18
• "SYSTEM Menu Map (Rev. 10)" on page 19
• "MAIN Board I/O Menu Map (Rev. 10)" on page 20
• "OPTION Boards Menu Map (Rev. 10)" on page 21
• "SENSOR SETUP Menu Map (Rev. 10)" on page 22
• "CALIBRATION Menu Map (Rev. 10)" on page 23
• "ADVANCED Menu Map (Rev. 10)" on page 24
In addition, the following menu maps are available in Appendix C:
• “HART Output Menu Map” on page 54
• “HART Review Menu Map” on page 55
IMPORTANT: Not all users will have access to all of the above menus. Some menus are restricted to only those users
with the proper passcodes.