August 2003
6-6 Programming Meter Settings
Entering Date and Time (cont.)
To set or change the time:
1. From the time text box, press the [
T] key once to scroll to the
time text box. This box displays the current meter time.
2. Press
[ENTER] to enter the text box. The meter highlights the
first number. Use the [
W] and [X] keys to scroll to any
number you wish to change.
3. Two alternatives are available to change a highlighted
number:
• Use the numeric keys to enter the desired number.
• Use the [T] or [S] arrow keys to scroll, in 1-digit
increments, to the desired number. (For example, if the text
box highlights 09, pressing the [
T] key twice changes the
number to 07.) You can scroll from 01 to 12 for the hour
and from 01 to 59 for the minute and second inputs. You
can also use the keys to alternate between AM and PM.
4. In either case, press
[ENTER] to confirm the entry.
Pressing the [
T] or [S] arrow keys causes the meter to scroll
within the Meter Settings options.
• To confirm the entries and return to Operate Mode, press [F3]
(OK). The PM880 returns to Operate Mode.
• To leave the window without confirming the entries, press [F2]
(Cancel) or the
[ESC] key. The PM880 returns to Operate
Mode.
To Next Page
Loading...
Need help?
General
