Logging Data 7-17
August 2003
Stopping All Logs
To stop all log that are currently pending or running, open the
Log Menu, scroll to the Pause All Logs option, and press
[ENTER]. The PM880 returns to the Log Manager, which
displays all logs programmed to run now or in the future with a
status of “Paused.”
Restarting All Logs
To restart all paused logs, open the Log Menu, scroll to the Start
All Logs option, and press
[ENTER]. The PM880 returns to the
Log Manager, which displays the logs with a status of “Pending”
or “Running.”
Ending All Logs
To end all currently pending or running logs, open the Log Menu,
scroll to the End All Logs option, and press
[ENTER].The PM880
returns to the Log Manager, which displays the running logs with
a status of “Finished.”
View All Sites
To check on all logs, open the Log Menu, scroll to the View All
Sites option, and press
[ENTER]. Logs are associated with the site
in use at the time the log is created. Thus, when another site is in
use, the PM880 automatically starts different logs. By default, the
Log Manager only displays the logs created with the current site.
View All Sites allows the Manager to list logs for all sites.
To Next Page
Loading...
