GE PM880 - Entering the Logging Menu

August 2003
7-2 Logging Data
Entering the Logging Menu
To enter the Logging Menu, press the [MENU] key at the lower
right of the PM880 keypad. The Main Menu replaces the Status
Bar at the top of the screen. Press the [
X] arrow key three times
to scroll from the Site Menu to the Logging Menu. At the
Logging Menu, press
[ENTER]. The screen appears similar to
Figure 7-1 below. Refer to Figure B-5 on page B-5 of Appendix
B, Menu Maps.
Figure 7-1: The Logging Menu
To scroll to a particular option, press the [
T] or [S] arrow keys
until you reach the option. Then press
[ENTER] to open the option
window.
When entering parameters in an option, press:
• The [T] key to step through the available parameters
• The [S] key to scroll back to a previously entered parameter
• The [F2] key (Cancel) or the [ESC] key to exit an option at any
time and return to Operate Mode without changing the
parameters.
Dew Point, °C Temperature, °C
-52.0
23.0
Pressure, PSIg
55.00
10.0
Run Time, Hours
K K
K
10 Minutes
-30
70
0
612
Site Program Meter Logging Service
Log Manager
New Log
About