GE PM880 - Entering the Program Menu

August 2003
3-2 Programming Site Data
Entering the Program Menu
To enter the Program Menu, press the [MENU] key at the lower
right of the PM880 keypad. The Menu Bar replaces the Status
Bar at the top of the screen. Press the [
X] arrow key once to
scroll from the Site Menu to the Program Menu. At the Program
Menu, press
[ENTER]. The screen appears similar to Figure 3-1
below. While following the programming instructions, refer to
Figure B-3 on page B-3 of Appendix B, Menu Maps.
Figure 3-1: The Program Menu
To scroll to a particular option, press the [
T]or [S] arrow keys
until you reach the option. Then press
[ENTER] to open the option
window.
Dew Point, °C Temperature, °C
-52.0
23.0
Pressure, PSIg
55.00
10.0
Run Time, Hours
Site Program Meter Logging Service
K K
K
10 Minutes
-30
70
0
612
Calibrate
System
User Functions
Probe