August 2003
3-18 Programming Site Data
Entering User Functions
User functions enable you to program mathematical equations on
each measurement. You can also use any parameter in the meter
to calculate a different parameter. To enter the User Functions
option, scroll to the User Functions entry on the Program Menu
and press
[ENTER]. The screen appears similar to Figure 3-8
below. To step through each parameter, press the [T] key.
Figure 3-8: The User Functions Window
1. The first prompt asks you to select the function number, 1
through 8.
a. Press
[ENTER] to open the drop-down menu.
b. Scroll to the desired function number (User F1, User F2,
etc.).
c. Press
[ENTER] to confirm the entry.
Set User Function
Function
User F1
Label
Units Sym
Dec. 0
Delete Check Done
To Next Page
Loading...
