GE PM880 - Page 117

August 2003
6-16 Programming Meter Settings
Changing Communications Settings (cont.)
IMPORTANT: Using IR232 requires the following parameters:
•Baud Rate -- 9600
•Parity -- None
•Stop Bits -- 1
•Data Bits -- 8
• To confirm the entries and return to Operate Mode, press [F3]
(OK). The PM880 returns to Operate Mode.
• To leave the window without confirming the entries, press [F2]
(Cancel) or the
[ESC] key. The PM880 returns to Operate
Mode.