Programming Site Data 3-15
August 2003
Entering Probe Identification Data (cont.)
6. The final prompt asks you to select a time period at which the
screen displays a calibration reminder for the probe,
determined from the last calibration date. GE Panametrics
recommends recalibrating a probe annually.
a. Press
[ENTER] to open the drop-down list. The menu
offers a choice of five time periods:
• None
• 6 months
• 12 Months
• 18 Months
• 24 Months
b. Scroll to the desired period, and press
[ENTER] to confirm
the entry.
7. Press the [
S] key to return to the Probe ID tab.
You now have three options:
• Use the arrow keys to enter another Calibration window and
program additional data.
• To confirm the data and return to Operate mode, press [F3]
(OK). The PM880 returns to Operate Mode.
• To leave the window without confirming the data, press [F2]
(Cancel) or the
[ESC] key. The PM880 returns to Operate
Mode.
To Next Page
Loading...
Need help?
General
