August 2003
3-22 Programming Site Data
Entering User Functions (cont.)
Figure 3-11: The Select Measurement Window
6. GE Panametrics recommends pressing
[F2] (Check) to test the
validity of the function. The PM880 displays either “OK” or a
message such as “Syntax Error.”
• Press [F1] to delete the entire function, or
• Press [F3] (Done) to confirm the function and return to
Operate Mode.
Select Measurement
No Unit Cancel Done
H
Hygro
Temperature
Pressure
Battery
UserFunction
Dew Point/°C
Dew Point/°F
Dew Point/K
Rel. Humidity
ppMv
ppBv
ppMw
MMSCF/IG
MMSCF/NG
To Next Page
Loading...
