USM Go Operator’s Manual xi
Preface
Safety Information
Before powering up or operating this instrument, the safety information in this section should be read carefully. This Operator’s Manual
should be stored in a safe place for reference.
IMPORTANT: This instrument is to be used only for testing materials in an industrial environment. Any use for medical applications or any
other purpose is not permitted.
IMPORTANT: This instrument is waterproof according to IP 67. It can be operated either with batteries or with the power supply unit. The
power supply unit meets the requirements of
Electrical Safety Class II.
Batteries
For battery operation of this instrument, GEIT only recommends the use of a lithium-ion battery. You should only use the battery
recommended by GEIT for operation of this instrument. You can charge the lithium-ion battery either within the instrument itself or with the
external battery charger.
IMPORTANT: See “Battery Disposal” on page 147 for instructions on proper battery disposal procedures.
To Next Page
Loading...
Need help?
General
