Chapter 3. Making Measurements
USM Go Operator’s Manual 69
3.1.2 Selecting the TOF-Detection Method (cont.)
4. After completing your selection, move the joystick up or down ( ) to navigate away from this function.
Note: The detection method chosen is indicated by a small icon. This icon is displayed in the display box containing the measured reading,
and in the options offered in the READING 1 through 6 and LARGE function boxes.
3.1.3 Setting Gate Alarms and Outputs
An alarm can be set for either one or both of the gates. This is accomplished by configuring either Reading Box 4 (in LARGE mode) or the
single Large Reading Box (in SMALL mode) to act as a virtual LED that mimics an indicator light. When so configured, the virtual LED
reading box is green when there is no fault condition and red when the alarm has been triggered.
To Next Page
Loading...
