Chapter 2. Instrument Setup
32 USM Go Operator’s Manual
2.3.2b Selecting a Display Grid (SETUP-CONFIG1-GRID)
1. In the SETUP menu, activate the CONFIG1 submenu using the joystick ( ). Several functions are displayed on the screen.
2. Use the joystick ( ) to select the function titled GRID, then press the center of the joystick ( ) to activate the function.
3. To change the display grid type, either move the joystick or press the function toggle. The selected grid style will be shown in the
A-Scan window on the display screen, after you return to Acquire Mode.
4. After making your choice, press the center of the joystick ( ) to deactivate the function.
To Next Page
Loading...
