Diagnostics/Troubleshooting
7-36 System view Versana Balance – Basic Service Manual
5808768-100 English Rev.9
7-6-1-2 Wireless-LAN Network
NOTE: To configure the Wireless-LAN network, the operator must login
as administrator.
1. Connect the wireless adapter in the USB port.
2. Enter Utility-> Connectivity-> TCP/IP, press
Configuration.
3. Double click Wireless network. you chosen, or click the
Connect at the left bottom of screen.
Figure 7-30. Wireless Network Conection
4. Input Network Key and Confirm Network Key, then click
Connect.
Figure 7-31. Connection Status
To Next Page
Loading...
