Remote Buttons
The remote control is capable of controlling more than just your
VCR, and if you have compatible GE, RCA, or ProScan
components, you may be able to control them without even
having to program the remote.
Component Buttons
POWER Turns off VCR when remote is set to control the VCR.
Also turns some compatible components on and off.
SAT CABLE Turns on a compatible GE, RCA, or ProScan
satellite receiver and sets the remote to control the receiver. Can
be programmed for other brands of satellite receivers. Also used
with the POWER button to turn on a compatible cable box (if
programmed) and sets the remote to control the cable box.
IFV Turns on a compatible GE, RCA, or ProScan TV and sets the
remote to control the TV. Also used with the POWER button to
turn on a different brand of TV (if programmed) and sets the
remote to control the TV.
VCH Turns on a compatible GE, RCA, or ProScan VCR and sets
the remote to control the VCR.
VCR Function Buttons
CHAN Up or Down Selects next higher or lower channel in
the VCR's channel memory.
CLEAR Resets time counter to 0:00:00. Allows you to change
entries when setting the clock or a timer recording.
F.ADV Lets you view one frame with each press of the button
when tape is in pause.
FWD Fast forwards the tape when the VCR is stopped.
Searches forward through a tape during playback. Starts slow-
motion playback during play-pause. Increases speed during
slow-motion playback.
GO BACK Switches between two channels. Select one channel
and then select another using the number buttons. Press GO
BACK to switch between the two channels. In menu mode, press
to go back to previous menu.
INFO Shows the status displays on the TV screen.
POWER
VCR CABLE TV
©©©
PAUSE PLAY RECORD
o@o
o@o
F.ADV STOP SEARCH
'o o O°
CHAN
'o o °o
'0 +0 °0 0 ÷
MUTE VOL
°0 © O-
INPUT TVoVCR INFO MENU CLEAR
O000O
GO BACK SPEED
© ©
SLOW TRACKING
-0 0-,- _0 04
20
To Next Page
Loading...
