GE VG4267 - Pro-Tect Plus TM Locking Feature; Tracking; Time Counter

_.. , :_ • _ : i!_ ., :
Pro-Tect Plus TM Locking Feature
To disable the usage of the VCR, or to protect your timer
recordings, you can lock the VCR so that the buttons on the VCR
or remote won't work.
• To Lock: Press and hold POWER or VCR on the remote for
approximately six seconds. SAFE appears in the display to
let you know the feature is activated.
• To Unlock: Press and hold POWER or VCR on the remote for
approximately six seconds.
Tracking
Your VCR has automatic tracking which removes the streaks or snow
from the picture. Automatic tracking is activated when you insert a
tape or turn on the VCR. Occasionally you may need to manually
adjust tracking, especially if the tape was recorded on a different
VCR. Just use the TRACKING buttons to remove the streaks or snow.
You can also use tracking when you PAUSE a tape to reduce jittering
of the picture.
When you manually adjust the picture, automatic tracking is turned
off. To turn automatic tracking back on, press both TRACKING
buttons on the front of the VCR at the same time, or eject the tape
and re-insert it.
Tracking has no effect during recording--only playback.
Time Counter
The time counter shows the actual time it takes to record a
program or play back a segment of a recorded tape. It helps
locate the beginning or end of programs you taped. The time
counter resets to 0:00:00 whenever the tape is ejected from
the VCR.
For example, if you record a 30-minute program at the beginning
of the tape and you want to go to the end of that program to
begin another recording, you would:
1. Press INFO twice to display the time counter.
2. Press CLEAR to reset the time counter to 0:00:00.
Hours
Minutes
0:30:00
l
Seconds
Locking Your VCR:
If a timer recording is programmed,
make sure your VCR is turned off.
Locking your VCR prevents the VCR
from being accidentally turned on.
46