L
o .
• ...
Back Panel
ooT - -
3 CH. 4 Switch Selects the channel to which you will tune the
TV to see the VCR picture if you connect the VCR using one of
the basic hookups.
AUDIO (R and L/MONO) and VIDEO IN 1 Jacks Receives
signals from another component, like a VCR or camcorder, when
it is connected to these jacks. Use INPUT on the remote to select
"L" to record from these jacks.
AUDIO (R and L) and VIDEO OUT Jacks Sends signals from
VCR to another component, like a TV or VCR, when it is
connected to these jacks.
IN FROM ANT. Jack Receives a signal from an antenna or cable
system when attached.
OUT TO TV Jack Passessignal to TV using the cable supplied.
62
To Next Page
Loading...
