GE VG4267 - On-Screen Displays

,
.
.
Press FWD to forward the tape until the time counter reads
0:30:00.
Press STOP. This is the approximate end of the program. (You
may want to press PLAY to verify.) Now, you can begin
recording at this spot.
Press INFO to remove the time counter from the screen and
return to the normal display mode.
On-Screen Displays
The INFO button shows the status of the VCR (STOP, PLAY,
RECORD, etc.), channel number, time counter, date, time, and
tape speed on the TV screen. The date and time must be set
before they can be displayed.
,
2.
.
Press INFO to see the on-screen displays.
Press INFO again to have only the time counter remain on
the screen.
Press INFO again to return to the normal display.
Turning off the VCR also resets the displays.
1
2
Stop Ch 05 0:30:00
11/18/97 Tue 01:30PM SLP
On-screendisp_y
(times ouH
0:30:00
Time counter only
(does not time out)
3
Normal display
47