| |
.
.
.
.
If your VCR viewing channel is 3 or 4, make sure the VCR
indicator appears in the VCR's display panel. If not, press
TV.VCR to turn it on.
Use the SPEED button on the remote to select a
recording speed. The tape speed indicator appears on
the TV screen.
Select the channel or line input (channel 00) to be
recorded.
Set the Reception: STEREO/MONO/SAP feature for the
type of audio you want to record. See Other
Features section.
AUDIO
1 Reception: STEREO
2 Tape PLayback: HI-FI
0 Exit
7. Press RECORD to start recording.
8. Press STOP when you are finished.
Recording Audio Only
You can record audio only from another audio source connected
to the AUDIO IN 1 (Rand L/MONO) jacks on the back of the VCR.
1. Press the INPUT button on the remote to select the line
input. "L" appears in the display.
The VCR will record audio from the audio equipment
connected to the AUDIO IN 1 jacks.
2. Use SPEED on the remote to select the recording speed.
3. Start audio source playing and press RECORD to begin
recording.
4. Press STOP on the remote (STOP.EJECT on VCR) when you
are finished.
Audio Connection
VCR
R_UOK_L VlDEO
o_@-@-@ VHF_JHF
o o
PHONO I_NER TAPE AUX
31
To Next Page
Loading...
