II I
Set the tape to the
point at which you want
to start marking.
When the tape is ready.
press MENU to start
Marking.
Press CLEAR to cancel
.
Press MENU to begin the marking process. The VCR will
play the tape until it finds six seconds (or more) of blank
tape or until the tape reaches the end. It will then rewind the
tape to the starting point you set and begin marking the
commercial segments.
MOVIE ADVANCE
MOVIE,,ADVANCE helps you locate certain parts of prerecorded
movies (rented or purchased). The feature works in two ways:
1) you can go to the beginning of the movie or 2) you can skip
from one preview to the next. MOVIEI_,ADVANCE works only on
cassettes recorded in the SPspeed with the safety tab removed.
1. Insert a tape with the safety tab removed and press SEARCH.
The following menu appears.
What type of tape
is this?
1 Purchased/Rented Movie
2 Home Recording
3 Other
Press CLEAR to cancel
.
Press 1 if the tape is a purchased or rented movie, press 2 if
it's a recording made at home, or press 3 if it is something
else or you don't know.
Pressing 2 or 3 gives the same response and takes you to a
different search feature. If you accidentally make a wrong
selection, press GO BACK to return to this screen.
If you press 1, the MOVIE ADVANCE menu appears.
MOVIE, ,ADVANCE is a trademark of SRT, Inc.
MOVIE, ,ADVANCE works only on
cassettes recorded in the SP speed
with the safety tab removed.
J
41
To Next Page
Loading...
