Operating
Operating spreader options
2018-9015-001
09-2016
104 / 192
● Remove suction hose by pushing
the receptacle lever (12) to
disconnect the suction hose adapter
(13) from the receptacle (14);
● Disengage the impeller;
12
13
14
● Lock mechanism in place by flipping
the locking flat bar (15) located on
one side of the receptacle (16).
Make sure it is hooked properly;
● Place the hoses on the supports and
secure it using the half collars, bolts
and nuts provided;
● Move to spreading area.
16
15
Refer to section Operating - Moving the spreader.
To Next Page