Maintenance
Open drains
2018-9015-001
09-2016
128 / 192
9.21 Open drains
After each use
Attention!
Make sure the spreader is empty before opening the drains.
● Use the wheel nut wrench to turn the
pivot bolt (1) to open the drain (2);
1
● Clean the drain (2);
2
● Use the wheel nut wrench to turn the
pivot bolt (1) to close the drain (2).
1
Impeller housing drain
● To open the drain, unlock the toggle
clamp (3). The cap will open to drain
the impeller housing;
● To close the drain, place the cap
over the impeller housing opening
and lock the toggle clamp (3).
3
To Next Page