Handling and assembly
Packing material disposal
2018-9015-001
09-2016
35 / 192
5.2.2 Assembly tools
Description Purpose
Wrench set To tighten bolts
Ratchet tool set To tighten bolts
Torque wrench To tighten bolts
Air impact To tighten wheel nuts
Brake spring pliers To install the air brake springs
Screw driver set To install bottom valve
Cutter To remove tie wrap
Fiber hammer
To insert knuckle pivot tubes
Floor jack To position the axle
5.2.3 Items provided by the owner:
● A PTO driveline meeting local regulations, if applicable.
● A tractor of appropriate size to match the spreader model. Refer to section
Technical data - Tractor specifications.
5.3 Packing material disposal
Handle the packing material properly and dispose according to your local rules
and regulations on waste disposal. Please refer to your local resources for any
questions. Recycle if possible.
To Next Page
Loading...