Operating
Spreading
2018-9015-001
09-2016
97 / 192
7.8 Spreading
Attention!
Never open cleaning openings and drains when the spreader tank
contains liquid.
Attention!
If using a PTO, disengage the PTO before turning.
Note!
Familiarize yourself with the hydraulic functions and spreading tools
before spreading.
7.8.1 Spreading with a nozzle
● Adjust the tractor speed according to the desired spreading rate. Refer to
section Appendix - Spreading rate calculation;
● Engage the impeller to start spreading;
● Disengage the impeller when the spreader is empty;
7.8.2 Spreading with twin deflector 25FT tool bar
Note!
The spreading pattern can be adjusted by changing the deflector
restriction plates and/or by changing the tool bar restriction plate.
● Engage the impeller to start spreading;
● Adjust the tractor speed according to the desired spreading rate. Refer to
section Appendix - Spreading rate calculation;
● Disengage the impeller when the spreader is empty;
To Next Page
Loading...