EasyManua.ls Logo

GEA EL48 - Operating the Spreader; Personnel Qualification and Operational Safety

GEA EL48
192 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operating
Checks before operation
2018-9015-001
09-2016
84 / 192
7 Operating
7.1 Special personnel qualification required for operation
Operating must be performed by qualified personnel in accordance with the
safety instructions.
Read the section Safety - Personnel qualifications.
7.2 Safety instructions for operation
Warning!
Tip over hazard when traveling on a hilly land. Adapt the tractor driving
to the land conditions.
Warning!
Do not tow this product at a speed exceeding 8 mph [12 km/h] when
the power steering system is engaged.
Warning!
Do not tow this product at a speed exceeding 25 mph [40 km/h].
Warning!
Do not operate this product if a person is on top.
Read the section Safety.
7.3 Checks before operation
The safety devices such as guards, grids, covers, chains, labels, etc. remain
in place to ensure safety;
Lubricants such as grease, oil, etc. are at appropriate level. To locate the
grease points, refer to section Appendix - Label position;
The wheel nuts are tightened at correct torque;
Tires are inflated at appropriate pressure;
The signal lights are functional;
The product is in perfect condition. There is no visible damage;
Only authorized personnel are in the working area of the equipment;
No unnecessary object or material is located in the working area of the
equipment;
The PTO driveline meets local requirements, if applicable.

Table of Contents