GEA EL48 - PowerHitch, Self-loading, and Fender Assemblies

Handling and assembly
PowerHitch assembly (optional)
2018-9015-001
09-2016
54 / 192
5.12 PowerHitch assembly (optional)
1
3
4
5
2
6
● Insert the hitch pin (1) in the tractor draw bar (2);
● Secure the hitch pin (1) using the Nord-Lock washer (3) and nut (4);
● Using a pipe wrench or a key, torque the nut to 600 ft-lb (813 NM) minimum;
● Install the plate (6) against the hitch pin, centered on the draw bar;
● Bolt the plates (5,6) together using provided hardware;
● Torque the bolts to 119 ft-lb (161 NM).