EasyManua.ls Logo

GEA EL48 - Page 189

GEA EL48
192 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Appendix
Flow rate adjustment
2018-9015-001
09-2016
189 / 192
Step 5: Deflector restrictor (if applicable)
When using a tool bar to spread manure, a restrictor is inserted in each deflector
to limit the opening and to reduce the flow rate.
Pressure is increased to allow larger spreading width.
● Insert a restrictor (1) in each tool bar
deflector (2).
1
2
11.22.2 Spreader with hydraulic HE impeller drive
1. adjust the flow control;
2. insert restrictors in the deflectors.
Step 1: Flow control (if applicable)
A spreader can be equipped with a manual flow control to set the flow rate. The
control range can be set from 0 to 100%.
Step 2: Deflector restrictor (if applicable)
When using a tool bar to spread manure, a restrictor is inserted in each deflector
to limit the opening and to reduce the flow rate.
Pressure is increased to allow larger spreading width.
● Insert a restrictor (1) in each tool bar
deflector (2).
1
2

Table of Contents