Operating
Connecting the spreader
2018-9015-001
09-2016
87 / 192
Ball hitch connection
2
1
3
4
● Lubricate all greasing points using grade 2 PRECISION
TM
XL5 MOLY EP2
grease (or equivalent);
● Remove the pin (1);
● Position the tractor to connect its draw bar to the spreader hitch;
● Install the pin (1) back in position;
● Perform the adjustment using the bolt and nut (2);
● Lower the ball hitch steering system (3);
● Connect the power steering rod (4).
To Next Page
Loading...