Commissioning
Particular hazards
7160-9001-560
01. December 2020
25 / 74
6 Commissioning
● Produce a report on the settings
● Highlight settings that are individual to the farm
6.1 Special Personnel Qualifications
Initial commissioning may only be carried out by specially qualified personnel in
accordance with the safety instructions.
Any settings that have to be made (e.g. on control units) must always be made by
personnel who have been suitably instructed/trained by the manufacturer.
See also the section on ”Personnel qualification”.
6.2 Particular hazards
● Incorrectly wired connections may destroy electrical/electronic components.
● Defective connections can cause the product to start up unexpectedly or make
uncontrolled movements.
● Electrostatic processes/interference may endanger electronic components and
also lead to software faults and data loss. Back up data regularly therefore.
To Next Page
Loading...
