In order for Mizar S to work in the best condition, Mziar S must be maintained regularly. The maintenance content is as follows:
1.
2.
3.
4.
5.
6.
7.
Tips:
1. Due to unstable factors such as signal interference in the USB cable, it is easy to lead to printing failure. Therefore, it is
2. For Online printing, break-resuming capability is disabled. If you need to print a large model, it is not recommended to use online
printing in order to ensure the successful completion of the printing task.
23
18
DAILYMAINTENANCEANDUSAGESUGGESTIONS
correctly in the slicing software, otherwise the slicing software may fail to connect to the printer.
To Next Page
Loading...
Need help?
General
