gefran ADP200

ADP200 • Quick installation guide - Specifications and connection 29
7.1.2 Connection of shielding (recommended)
A
B
C
Optional Power Shield kit:
- Cod. S726101 (size 2)
- Cod. S726501 (size 3)
- Cod. S72902 (size 4)
- Cod. S725621 (size 5)
Loosen the two screws (B), put the metal support (A) (optional, POWER SHIELD KIT) in place and screw down tightly.
Fasten the power cable shield to the omega sections (C) as illustrated in the gure.
• Sizes 5S550 and 5S750 : for these sizes the metal support (A) is not provided.
Cable shielding must be provided by the installer.