gefran ADP200

ADP200 • Quick installation guide - Specifications and connection 7
2 - Introduction to the product
The new ADP200 inverter series represents an innovative concept in drive technology, the result of constant
technological research and the know-how in plastics applications that the Gefran Group has acquired by working side
by side with major sector players.
This new series has been engineered and developed to satisfy the real needs of plastics machine manufacturers and
to provide them the best and most economically competitive innovations on international markets.
Based on full mechanical modularity, a powerful and “fully open” programming platform, and a specic PID algorithm
for injection molding machine servo-pump control, the ADP200 offers completely exible integration and high
performance for plastics applications.
The ADP200 features the following as standard:
- Motor type: Synchronous
- Control mode: Vector control with feedback (Encoder expansion card mandatory)
- I/O conguration, EXP-IO-D8A4R2-ADP
• 6 digital inputs (DI) + enable (EN-HW);
• 2 digital outputs (DO);
• 3 differential analog inputs (AI):
- 1 for pressure sensor:
Voltage: 0…10 V or 0.1…10.1 V (3 wires)
Current: 0…20 mA or 4…20mA (2 wires)
- 2 for ow/pressure references or general purpose:
Voltage: +/- 10 V
Current: 0…20 mA or 4…20 mA
• 1 analog output (AO):
Voltage: 0…10 V or 0.1…10.1 V
Current: 0…20 mA or 4…20mA
• 2 relay outputs (RO);
• 1 motor protection input (MOT): compatible with PTC, KTY, Klixon.
- Encoder conguration, EXP-RES-I1-ADP
• Resolver encoder
• Excitation Frequency: from 2.0 to 10 kHz
• Transformation ratio: from 0.1 to 1.0
• Excitation Voltage: from 1.1 Vrms to 5.6 Vrms
- Optional cards can be supplied on request for specic requirements.
> I/O Optional card (EXP-IO-D10A3R2-ADP):
• 1 enable input (EN-HW);
• 8 digital inputs (DI);
• 3 differential analog inputs (AI);
• 2 digital outputs (DO);
• 2 relay outputs (RO);
• 1 motor protection input (MOT): compatible with PTC, KTY, Klixon.
> Encoder optional cards:
• EXP-RES-I1R1-ADP, Resolver encoder + Repeat
• EXP-DE-I1R1F2-ADL, Digital encoder 3 Channels card + Repeat + 2 Freeze
• EXP-EN/SSI-I1R1F2-ADL, Sinusoidal encoder card - Absolute EnDat + Repeat + 2 Freeze
• EXP-HIP-I1R1F2-ADL, Hiperface encoder 3 Channels card + Repeat + 2 Freeze
• EXP-SE-I1R1F2-ADL, Sinusoidal encoder 3 Channels card + Repeat + 2 Freeze
• EXP-SESC-I1R1F2-ADL, Sinusoidal SinCos encoder 3 Channels card + Repeat + 2 Freeze.
2.1 Dedicated features
• Self-tuning rotational and stand still of speed-current-ux regulators and motor data identication
• Torque control
• Simplied Start-up menu
• Motor, Drive and Braking resistor I2t thermal protection
• Multispeed function (16 programmable preset)
• 4 independent programmable Multi-ramp with jerks
• Jog function
• Motorpotentiometer function
• Droop function
• Double motor parameters setting
• Variable switching frequency
• Motor temperature monitoring
• Advanced programming via MDPLC tool (IEC 61131-3 standard environment)