913323/CP0112 10 PRINTED IN U.S.A.
Additional Safety Reminders
Ü User/operator safety practices, as indicated by
industry standards, are included in this Operator’s
Manual and intended to promote safe operation of
the machine. These guidelines do not, of course,
preclude the use of good judgment, care and com-
mon sense that may be necessary for the particular
jobsite conditions.
Ü It is essential that operators be physically and men-
tally fit and free of mind-altering drugs and chem-
icals, and thoroughly trained in the safe operation
of the machine. Such training should be presented
completely to all new operators and not condensed
for those claiming previous experience.
Information on operator training is available from
several sources, including the manufacturer.
Ü Some illustrations used in this manual may show
doors, guards and shields open or removed for
illustration purposes ONLY. BE SURE that all
doors, guards and shields are in their proper oper-
ating positions BEFORE starting the engine.
Before Operation Safety Reminders
Ü Check brakes, steering, and hydraulic system prior
to starting operation. Operate all controls to ensure
proper operation. Observe all gauges and indica-
tors for proper operation. If any malfunctions are
found, correct the cause prior to using the machine.
Ü ALWAYS wear appropriate personal protective
equipment for the job and working conditions.
Hard hats, goggles, protective shoes, gloves,
reflector-type vests, respirators and ear protection
are examples of types of equipment that may be
required. DO NOT wear loose fitting clothing,
long hair, jewelry or loose personal items while
operating or servicing the machine.
Ü ALWAYS check the job site for terrain hazards,
obstructions and people. Remove all objects that
do not belong in or on the machine and its equip-
ment.
Ü Walk around the machine and warn all personnel
who may be servicing the machine or who are in
the machine path prior to starting. DO NOT start
until all personnel are clearly away from the
machine.
Ü Gehl telescopic handlers are designed and intend-
ed to be used only with Gehl attachments and
approved attachments. To avoid possible personal
injury, equipment damage and performance prob-
lems, use attachments that are approved for use on
and within the operating capacity of the machine.
Contact your dealer or Gehl Company for infor-
mation on attachment approval and compatibility
with specific machine models. Gehl cannot be
responsible if the machine is used with a non-
approved attachment.
Operation Safety Reminders
Ü Any or all of the following elements may affect the
stability of the machine: terrain, engine speed, type
of load being carried and placed, improper tire
inflation, weight of the attachment tool, and abrupt
movement of any control lever. IF YOU ARE
NOT CAREFUL WHILE OPERATING THIS
MACHINE, ANY OF THE ABOVE FACTORS
COULD CAUSE THE MACHINE TO TIP,
AND YOU COULD BE THROWN OUT OF
THE OPERATOR’S STATION, WHICH
COULD RESULT IN SERIOUS INJURY OR
DEATH!
SAFETY
WARNING
ALWAYS maintain a safe distance from elec-
tric power lines and avoid contact with any
electrically charged conductor or gas line. It is
not necessary to make direct contact with a
power line for power to ground through the
structure of the machine. Keep the boom and
load at least 10 ft. (3 m) from all power lines.
Accidental contact or rupture can result in
electrocution or an explosion. Contact the
“Call Before You Dig” referral system number
at 8-1-1 in the U.S., or 888-258-0808 in the U.S.
and Canada, to locate any underground utility
lines BEFORE starting to dig.
To Next Page
Loading...
Need help?
General
