Gema OptiStar CG08-C User Manual

V 02/18
12 • Product description OptiStar CG08(-C)
Operating elements
Display and input buttons
NOTE:
For easier operation of the control unit, the preset and actual values
are distributed across several levels. The "sel" key is used to switch
between the levels. If no controls are used within 6 s, the device
automatically returns to level 1.
Displays, Level 1
Designation Function
A1-A4
Display of actual values, desired values and system
parameters
Flashes when the possible range is exceeded.
A5
Display of program numbers, error diagnosis codes and
status information
S1
Powder output (display in %)
S4
Total air volume (display in Nm³/h)
S7
High voltage (display in kV)
S9
Spraying current (display in µA)
S12 remote
Remote operation mode, no local operation possible
Remote operation mode is used as keyboard lock, reduced
operation is possible
S13
Gun release
S14 system
System release in network operation
S15
Display of predefined operating modes or display of
cleaning mode during cleaning
S1
S4
S7
S9
S15
A1 – A4
A5
S13
S12
S14

Gema OptiStar CG08-C Specifications

General

Brand	Gema
Model	OptiStar CG08-C
Category	Control Unit
Language	English