Welcome to Geodimeter System 600/600 Pro
Geotronics, now Spectra Precision AB, has since the release
of Geodimeter System 400 presented a large number of
inventions within the surveying field; the tracklight, the
alpha-numeric keyboard, servo, one-person total station etc.
In 1994 Geotronics introduced the first flexible total station,
Geodimeter System 600, which made it possible for the user
to physically tailor his or her total station to his/her needs. In
1998 Spectra Precision AB introduce Geodimeter System 600
Pro which include a number of technical improvements such
as a faster CPU and faster and smoother servo positioning.
The system includes, of course, all of the features that are
typical for Geodimeter, such as servo-assisted drive
(optional), numeric or alpha-numeric control units (key-
boards), tracklight, tracker (optional), radio side cover
(optional) and RS-232C communication.
The contents of this manual are as follows:
Part 1. Operator's instructions
Chapter 1, Introduction,
describes the contents of the transport
case and the functions of the controls, control unit and display.
Chapter 2, Pre-Measurement,
explains what you should do and
think about when you are out measuring in the field, and
what parameters should be preset. This chapter also descri-
bes how to make special settings such as the number of
decimals, how to read the display, etc.
Chapter 3, Station Establishment,
contains step-by-step instruc-
tions on how to set up your instrument and then establish
the station at a known or an unknown point.
About this manual
B
To Next Page
Loading...