2.11.3
CARD MEMORY CHAPTER 11
GEODIMETER SYSTEM 600
Overview
The optional Card Memory (571 222 000) opens the
possibility of storing measurement data on portable
PCMCIA, ATA Sundisk memory cards. These can then be
read from an ordinary computer. Thus can data be transfer-
red between the Geodimeter and a PC and vice versa without
having to bring the instrument with you. The portable card
comes handy in a normal size pocket.
How to run the installation program
The Card Memory device is delivered with an installation
program which you should run to install the device for your
instrument if you have program version 632.02.01 or older.
For the installation you will need a computer, a Geodimeter
System 600 instrument and a system cable for connecting the
computer with the instrument. Please follow the instructions
that are enclosed with the Card Memory device to complete
the installation.
Please see page 1.1.19 for instruction on how to check the
program version in your instrument.
Installation
To Next Page
Loading...