Geodimeter 600 - How to activate Tracklight

2.3.4
TRACKLIGHT CHAPTER 3
®
GEODIMETER SYSTEM 600
Tracklight is activated from the keyboard by pressing
on the keyboard unit.
The display now shows:
How to activate Tracklight
Tracklight
instru-
ment
Tracklight
RPU
MNU
61
Tracklight is switched off automatically when the instrument
is powered off. It is worth noting that the life length of the
tracklight bulb will be considerably diminished if the high
intensity mode is used frequently. Use this setting only during
bad visibility or when the distance demands it.
❏
❏
❑
Key in 0 if you wish to switch off Tracklight during
measurement.
Key in 2 if you wish to switch on Tracklight with
normal light intensity.
Key in 1 if you wish to switch on or change over to
highbeam intensity during bad visibility conditions.
Tracklight 10:18
0=OFF
1=HIGH
2=NORM
Fig 3.3 Activation of Tracklight