1.1.3
INTRODUCTION CHAPTER 1
GEODIMETER SYSTEM 600
Unpacking & Inspection
Before we begin to describe the operating procedure of your
Geodimeter instrument, it is first necessary to acquaint
yourself with the equipment received:
• Instrument Unit
• Transport case
• Tribrach
• Rain cover
• Sight marks (stick-on)
• ASCII Table (stick-on)
• User Manuals
• Tool kit
Inspect the shipping container. If it is received in poor condi-
tion, examine the equipment for visible damage. If damage is
found, immediately notify the carrier and the Spectra Preci-
sion sales representative. Keep the container and packing
material for the carrier´s inspection.
Inspection
To get the correct measurement with system 600 it is
important that you aim at the sight marks of the target and
towards the center of the range pole.
Aiming at the target
Note!
Some equipment is market dependent
To Next Page
Loading...