Geodimeter 600 - Handling hints

2.11.9
CARD MEMORY CHAPTER 11
GEODIMETER SYSTEM 600
Handling hints
• The Card Memory device is always the last device in the
serial chain. When having it attach on the panel
attachment you cannot communicate via the foot
connector.
• If you intend to have the Card Memory device attached to
the panel attachment, the device must be attached prior to
starting the instrument, otherwise you cannot
communicate with it.
• If you have formatted a memory card yourself, you can
expect the access time to be a little longer than usual, the
first time you try to access the card.
• When using the editor and accessing large files from the
memory card, you can expect longer access times than
when handling files from the internal memory.
• It is recommended that you keep the Card memory door
closed at all times except when inserting the memory card
and that you take the device indoors after survey in moist
weather. It should then be left to dry naturally.
• If Battery low occurs during a file transfer or a registration,
you should check that the action was being correctly
performed.
• If you have two keyboard panels attached to the
instrument at the same time, you cannot access the Card
memory.
Geotronics AB cannot be held responsible for any type of memory loss
using the card memory.