Geodimeter 600 - Station Establishment - P20

1.3.11
STATION ESTABLISHMENT CHAPTER 3
GEODIMETER SYSTEM 600
PRG
20
Station Establishment (P20) is a basic software package for
all Geodimeter field calculation programs. This program is
used to calculate and store instrument setup data which is
required for some of the field calc. programs. The programs
that follow P20 today are SetOut, RoadLine and RefLine
(see Fig. 3.5). If you try to activate any of these programs
without first establishing your station, you are taken directly
to P20.
In general
Station Establishment - In general
Program 20 Station Establishment
The program is divided into three main functions:
1. Known station – for station establishment when the
coordinates of your station point
and reference object are known.
2. Free station – for free station establishment using
2-10 points whose coordinates are
known.
3. Known station+ – for station establishment when the
coordinates of your station point and
up to ten reference objects are known.
Program 39
RoadLine 3D
Program 29
RoadLine 2D
Program 24
RefLine
Program 23
SetOut
Fig. 3.5. Station establishment is necessary for running the above programs
Program 20
Station Establishment
PRG
20